Academic journal article
By Ward, Dennis C.
Forensic Science Communications , Vol. 1, No. 2
Frequently, applications of scanning electron microscopy (SEM) and X-ray analysis in forensic science include the analysis of small (less than 100 [micro]m) individually handled samples. A mounting method for analyzing small samples has been implemented that has several advantages over commonly used double-sided specimen mounting tapes and liquid adhesives (Basu and Ferris 1980; Wrobel et al. 1998). This method uses pyrolytic carbon planchets (available from electron microscopy suppliers) as specimen mounts. These disks are nonporous, glass-like, flat, and reusable.
Duro-Tak[R] 80-1061, a pressure-sensitive adhesive, is available from National Starch and Chemical (10 Finderne Avenue, Bridgewater, New Jersey 08807-3300; phone: 800-797-4992; web site: http://www.fbi.gov/cgi-bin/outside.cgi?http://www.nationalstarch.com/). Duro-Tak[R] 80-1061 can be applied to a mount as a spot, line, or thin film. A spot or line is applied with a capillary tube or microdropper. A thin film is applied by drawing a drop of adhesive across the planchet with the leading edge of a coverslip. The dilution of the adhesive is adjusted with acetone to give the desired thickness. Once applied, the adhesive remains tacky indefinitely. Samples to be analyzed are then transferred to the adhesive layer.
This method of sample mounting for SEM and X-ray analysis has several advantages over conventional methods:
* The elemental contribution of the substrate is only carbon. …