Newspaper article The Christian Science Monitor

US Needs Fresh Approach to Nuclear Energy

Newspaper article The Christian Science Monitor

US Needs Fresh Approach to Nuclear Energy

Article excerpt

THE nuclear-power industry in the United States is currently in a hiatus. The primary reason for this is rooted in the industry itself. The nuclear industry has had the technical capability to make reactors that can't melt down. But it has not done so.

Why has the nuclear industry not pushed more vigorously in the direction of the low power density technology that makes this possible? Mostly because of the lack of public and institutional support, and the huge existing investment in first-generation reactor technology. There has also been concern that the cost of meltdown-proof safety characteristics could not be justified.

These factors have made the industry and the government reluctant to pursue quantum improvements in reactor designs. As a result, the world is struggling with acceptance of 30-year-old technology and, at the same time, proceeding along two dangerous paths: excess reliance on Middle East oil and on currently inexpensive natural gas.

Like all energy sources throughout history, first-generation nuclear reactors have had problems. The most obvious are those of Three Mile Island and Chernobyl. There are also the problems of cost and schedule caused by systems that are too big, too complicated, and too onerous. High operating costs, aggravated by spiraling regulatory requirements and the need for premature replacement of major systems, such as steam generators, have undermined public confidence and nuclear power's competitiveness. Finally, there are concerns about radioactive wastes with half-lives of thousands of years and nuclear proliferation questions.

In the face of this history and many justifiable concerns, some people have suggested we should simply abandon nuclear power. I believe it would be shortsighted and foolish to do so.

With the best second-generation reactor design we have the ability to address virtually all of the concerns about nuclear power. In meltdown-proof reactors, the power density is low and the reactor size is such that there is not enough heat available to fail - even during an accident involving complete loss of coolant. The tiny high temperature-tolerant ceramic fuel particles encapsulate and contain the products of fission. In case of an unplanned increase of temperature, the reactor shuts itself down.

Siting the reactors underground enhances security and containment features. These factors also effectively eliminate the risk to the public from potential sabotage, terrorist activity, or even overt military attack. Modularizing the reactors and building them in factories with factory cost- and quality-controls makes their cost and schedules predictable and minimal.

The leading work on one such design, helium reactor technology, is currently being done by General Atomics of San Diego. The first work on the technology began in Russia in 1949 and substantial advances were made in Germany through the '60s, '70s, and '80s.

Improvements of this kind should help the public acceptance of nuclear reactors. Indeed, they are needed to offset the consumption and emissions of millions of barrels of imported oil and billions of cubic feet of natural gas.

There is another reason why the world cannot turn its back on nuclear power. Hundreds of tons of uranium and plutonium exist in weapons and they are becoming surplus. The arms agreements, calling for the destruction of tens of thousands of nuclear weapons, create this situation, and an incredible opportunity.

The opportunity is to destroy uranium and plutonium from the weapons while providing much-needed electricity. …

Author Advanced search


An unknown error has occurred. Please click the button below to reload the page. If the problem persists, please try again in a little while.